Cost: $1,755.00 per student Duration: 40 Hours Prerequisites: 80 hours of conventional UT training (UT LvII Certification Preferred) Equipment Needed: All equipment, including scope (OmniScan X3) is provided for this […]
Cost: $1,755.00 per student Duration: 40 Hours Prerequisites: PA- 101 (40 hours of intro to PAUT) Equipment Needed: All equipment, including scope (OmniScan X3) is provided for this class. Attendees […]
Cost: $1,755.00 per student Duration: 40 Hours Prerequisites: Minimum of 80 Hours of Phased Array Training Equipment Needed: All equipment, including scope, is provided for this class. Attendees are encouraged […]
PA-CAT- Phased Array Composite Angle Technique for Assessing Corrosion at Pipe Supports Cost: $1,755.00 per student Duration: 24 Hours Prerequisites: UT LvII certification + minimum of 80 hours of PAUT […]
Cost: $ 1,755.00 per student Duration: 40 Hours Prerequisites: UT Level II certification or minimum of 80 hours conventional UT training. Equipment Needed: All equipment, including scope, is provided for […]
Cost: $ 3,900.00 per student (For the full 80 hour course, two weeks long) Duration: 80 Hours Prerequisites: UT Level II certification minimum, Phased Array level 2 recommended. Equipment Needed: […]
Cost: $ 3,900.00 per student (For the full 80 hour course, two weeks long) Duration: 80 Hours Prerequisites: UT Level II certification minimum, Phased Array level 2 recommended. Equipment Needed: […]
Cost: $1,195.00 per student Duration: 40 Hours Prerequisites: None, but it is recommended to have some basic experience such as UT thickness Equipment Needed: -UT Scope (A scope may be […]
Cost: $1,195.00 per student Duration: 40 Hours Prerequisites: 40 Hours of Level I Training Equipment Needed: -UT Scope (A scope may be provided if necessary but inventory is limited so […]