 |
 |
PA-CAT- Phased Array Composite Angle Technique for Assessing Corrosion at Pipe Supports Cost: $1,595.00 per student Duration: 24 Hours Prerequisites: UT LvII certification + minimum of 80 hours of PAUT LvII training. PAUT LvII certification is preferred. Equipment Needed: All equipment, including OmniScan X3, may be provided for this class. Attendees are encouraged to bring their […]
Cost: $ 3,500.00 per student (For the full 80 hour course, two weeks long) Duration: 80 Hours Prerequisites: UT Level II certification minimum, Phased Array level 2 recommended. Equipment Needed: All equipment, including scope, is provided for this class. Attendees are encouraged to bring their own personal scope if they have one but it is […]
Cost: $ 3,500.00 per student (For the full 80 hour course, two weeks long) Duration: 80 Hours Prerequisites: UT Level II certification minimum, Phased Array level 2 recommended. Equipment Needed: All equipment, including scope, is provided for this class. Attendees are encouraged to bring their own personal scope if they have one but it is […]
Cost: $1,595.00 per student Duration: 40 Hours Prerequisites: 80 hours of conventional UT training Equipment Needed: All equipment, including scope (OmniScan X3) is provided for this class on a limited basis. Attendees are encouraged to bring their own personal scope if they have one but it is not required. For an ONSITE QUOTE or to […]
Cost: $1,595.00 per student Duration: 40 Hours Prerequisites: PA- 101 (40 hours of intro to PAUT) Equipment Needed: All equipment, including scope (OmniScan X3) is provided for this class. Attendees are encouraged to bring their own personal scope if they have one but it is not required. For an ONSITE QUOTE or to REGISTER contact […]